13. Ky.FW Key Follow
Key follow defines how a note maps to the pitch of the oscillators.
A value of 100 will map a note's pitch to the oscillator's pitch 1:1. A value of 200 will map a note's pitch to the oscillator's pitch 2:1, and so on.
This parameter is useful for generating different timbres for AM and FM synthesis, depending on the note struck. It can also "lock in" a fixed oscillator pitch for an oscillator by setting it to 0, which is, for example, useful when using one oscillator as a fixed frequency or amplitude source.
You may also be interested in...
- Terms, Conditions and Warranty (under Order)
- 13. Sync analog sync pulse (under Glob (song globals) page)
Keep this setting at 'off' if the breakout cable is not in use.
- 16 x 16 x 16 x 16 (under The very basics)
- Ducking (under Sidechaining, gating, ducking and compression)
- Booting up (under The very basics)
Boot-up after a firmware update/reset may take longer.