- Advanced techniques
- Conditional tremolo and vibrato
Conditional tremolo and vibrato
The amplitude LFO and pitch LFO for each oscillator can be set to only trigger only if a step is accompanied by the 'ALFO' or 'PLFO' conditionals.
On the OSc1 and/or OSc2 pages, set the 6/Sn/A.L.tr ("amplitude LFO trigger") for conditional tremolo, or the 7/hh/P.L.tr ("pitch LFO trigger") for conditional vibrato. to "Cond" ("conditional"). This allows for setting up a patch that exhibits tremolo (amplitude modulation) or vibrato (pitch modulation) only when the 'ALFO' or 'PLFO' conditionals are encountered.
You may also be interested in...
- Without conditional triggering (under Example)
- Conditional triggering and modification (under Quick start guide and video)
The two parameters that are relevant to conditional triggering are 'when' and 'do'.
- Conditional triggering and modification (under Guides, tutorials and docs)
'do'; specifies the modification that should be made if the condition is satisfied.
- With conditional triggering and modification (under Example)
The exact same basic 16-step (1-bar) pattern with all elements being conditionally triggered and modified.
- Example (under Conditional triggering and modification)
This example demonstrates a typical use of conditional triggering and modification.