You may also be interested in...

• Synthesizer | Sequencer | Sampler

  * polyphony restrictions may apply depending on DSP resources used ** direct mic-level sampling to be mainly used for recording voice samples and vocoder input *** first 16 samples only, "Teenage Engineering" and "OP-1" are registered trademarks of Teenage Engineering AB.

• 2. S.buS Send Bus (under Dynamics)

  Specifies the bus to which the signal from this track should be sent.

• 11. CM.At Compressor Attack (under Dynamics)

  Specifies how slow/fast the compressor should kick in for this track.

• 10. CM.rt Compressor Ratio (under Dynamics)

  Specifies the compression ratio for signal above the threshold.

• 9. CM.Th Compressor Threshold (under Dynamics)

  Specifies a threshold (0-100) above which the track's compressor should kick in.